A fence that needs repainting every two years is not a fence. It is a maintenance schedule. Most homeowners in the Lower Mainland find out within a few seasons that a wood fence in BC’s wet climate is a commitment, not just an installation. The paint peels, the boards warp, the posts rot at the base, and before long the fence that was supposed to last 20 years needs replacing at year 12.
Metal fencing ends that cycle. Steel fencing and aluminum fencing do not rot, do not warp, and with a powder-coated finish, do not need repainting. They hold their structure and their appearance in BC’s rain and UV without annual maintenance. A properly installed metal fence in Vancouver lasts decades with nothing more than an occasional rinse.
At TJ Railing, we design and install metal fencing Vancouver for residential and commercial properties across the Lower Mainland. Metal fence panels in steel and aluminum, metal privacy fence systems for full sightline blocking, and custom configurations for non-standard lots and slopes. Every installation is measured, designed, and built for the specific property.
GET A FREE QUOTE
Fill out the form and we'll get back to you to follow up & get your project started with a free, no-obligation quote.
SERVICE OVERVIEW
Steel fencing is the strongest option in our metal fencing range. Structural steel posts and panels with powder-coated finishes rated for BC's outdoor climate. Steel is the right choice for commercial properties, high-security residential applications, and anywhere the fence needs to handle significant physical load or potential impact.
We install steel fencing in flat panel, vertical bar, and custom profile configurations. For properties where a solid metal privacy fence is required, steel panel infill provides a complete sightline block with maximum structural integrity.
Aluminum fencing is the standard choice for residential metal fencing Vancouver applications. Lighter than steel, easier on post hardware, and corrosion-resistant without additional treatment. Aluminum does not rust in BC's wet climate, which makes it particularly well-suited for coastal properties, poolside installations, and any application where moisture contact is ongoing.
Our aluminum fencing systems are available in vertical picket, flat panel, and horizontal configurations. Powder-coated in matte black, white, bronze, and custom colors to match the property's exterior.
Pre-engineered metal fence panels install between posts set at standard spacing, delivering a consistent and efficient installation for straight fence runs. Panel systems are available in both steel and aluminum, in privacy and semi-privacy configurations.
For properties with slopes, corners, or non-standard dimensions, we cut and fabricate custom sections to fit the layout. A metal fence panel system that does not fit the terrain properly is an ongoing problem. We design around the actual property, not an ideal flat lot.
A metal privacy fence uses solid or near-solid panel infill to create a complete visual barrier from the street or neighboring properties. Steel and aluminum privacy panels are available in horizontal and vertical orientations, in heights from 1.2m to 1.8m standard, with taller sections available where local bylaws permit.
For homeowners who want privacy without the maintenance of wood, a metal privacy fence is the most durable long-term option available. It delivers the same sightline block as a cedar privacy fence with none of the maintenance demands.
We measure your property and design the fence layout to fit. Slopes, corners, gates, and non-standard dimensions are all handled.
All posts are set in concrete footings at the depth required for BC's frost line. No surface-mount post systems that loosen over time.
Full itemized quote before we start. Starting from $65 per linear foot installed for aluminum fencing.
Based in Port Coquitlam, serving the Lower Mainland regularly.
AREAS WE SERVE
We install metal fencing across the Lower Mainland, Fraser Valley, and Sea-to-Sky corridor:
GOOGLE REVIEWS
Real feedback from homeowners and property owners who chose TJ Railing & Patio Cover for glass railing, gate, fence, and exterior system projects across the Lower Mainland.
PROCESS
We visit your property, measure the fence line, assess the terrain and soil conditions, and walk you through the options for metal fencing. Steel or aluminum, privacy or open panel, horizontal or vertical.
We design the fence layout for your specific property, including post spacing, panel profile, and height. You get a clear, itemized quote before anything moves forward.
Steel or aluminum posts are set in concrete footings at the engineered spacing. Posts are set plumb and allowed to cure before panels are installed.
Metal fence panels or custom-cut sections are installed on the post system. Fasteners are torqued to spec and alignment is confirmed.
Post caps are installed. The site is cleaned and the full fence line is inspected before we leave.
We walk the fence line with you and confirm everything meets your expectations.
Ready to install metal fencing that holds up in BC’s climate without the annual maintenance? Get your free on-site consultation today. We come to you, measure the fence line, and give you a clear quote with no obligation.
FAQs
Metal fencing Vancouver starts from $65 per linear foot installed for standard aluminum fencing systems. Steel fencing and metal privacy fence systems start higher due to material and fabrication costs. Contact us for a free on-site quote with exact numbers for your project.
Steel fencing is heavier, stronger, and more appropriate for commercial, high-security, and heavy-duty applications. It costs more and is harder to work with on site. Aluminum fencing is lighter, easier to install, naturally corrosion-resistant without additional treatment, and more affordable. For most residential applications in the Lower Mainland, aluminum fencing is the right choice. For commercial perimeters and high-security applications, steel fencing is the better option.
Aluminum fencing does not rust. Aluminum is naturally corrosion-resistant and does not oxidize the way steel does. Our steel fencing systems use powder-coated finishes that seal the surface against moisture, preventing rust formation. As long as the powder coat is intact, steel fencing will not rust in normal residential conditions.
A properly installed metal fence with a powder-coated finish lasts 30 to 50 years in BC’s climate. Aluminum fencing in particular has an essentially indefinite structural lifespan since aluminum does not corrode. The finish may need attention after 20 or more years in high-UV or coastal environments, but the structure itself remains sound.
In most BC municipalities, a fence up to 1.8m in height on a residential property does not require a permit. Fences taller than 1.8m, fences on corner lots near intersections, and commercial fencing may require approval. We know the fence permit requirements across the Lower Mainland and can advise based on your property and location.
Yes. Metal fence panels can be installed using a stepped or raked approach to follow the slope of the terrain. Stepped fencing follows the slope in horizontal increments, creating a staircase profile. Raked fencing follows the slope continuously, with the panels cut at an angle to match the grade. We advise on the right approach during the consultation based on the slope gradient and the fence style.
Most residential metal fencing projects take two to three days depending on linear footage and terrain. Post setting and curing typically takes one day, with panel installation following on the next day. We give you a clear timeline before the project starts.
RELATED SERVICES
